Oil & Gas

Valves & Actuators With Controls

In the Oil and Gas industry Tee Dee deals with a wide range of valves and actuators from the world’s leading manufacturers. With sizes ranging from 1/2″ to 36″, pressure ratings of 150 to 2500 and almost any material of construction gives us the extensive choice of products catering to the needs of the oil & gas, industry, energy, chemicals, building and infrastructure.

 

The materials are Carbon steel, Low temperature carbon steel, stainless steel, alloys, special alloys like nickel and titanium alloys.

  • GATE VALVE design standards API 600,API 602
  • GLOBE VALVE design standard BS 1873,API 602
  • CHECK VALVE design standard BS 1868,API 6D,API 602
  • BALL VALVE(Floating ,Trunnion type with top entry and side entry construction) Design API 6D,ISO 17292,API 608
  • DBB VALVE design standard ASME B16.34
  • BUTTERFLY VALVE design standard API 609
  • VALVE WITH ACTUATOR PACKAGE (electric, hydraulic, and pneumatic actuators)

Seamless and Welded Pipes

TEEDEE can supply Seamless and Welded pipes in all grades of Carbon Steel, Stainless Steel, and Alloy Steel according to EN, ASTM and API standards. Diameter range from 1/8” to 24”.
Type Specification Grades
CS Pipes ASTM/ASME A53 /A106 API 5L Gr B Gr B to Gr X 52
Low Temperature CS Pipes ASTM A333 Gr 3 and Gr 6
Stainless Steel & Special Stainless Steel ASTM/ASME A312 ASTM/ASME A790 ASTM/ASME A790 TP 304/304L, 316/316L, 310, 317, 321, 347, 410, 904, H Grades UNS S31803 / S32205 – Duplex 2205 UNS S32750 / S32760 – Super Duplex 2507

Project Solution Services

The Project Support Services division specializes in providing one-stop material, equipment and service packages for engineering and construction projects in the oil & gas, chemical, petrochemical, water treatment and power markets. We supply the broadest possible range of equipment and steel by matching end-user technical specifications with our global sourcing network.

 

Butt weld Fittings

TEEDEE supplies Butt weld fittings in all grades of Carbon Steel, Stainless Steel, and Alloy Steel, according to EN, ASTM and API standards in seamless or welded construction.

 

The various types of Butt weld Fittings supplied are

  • Equal Tees
  • Reducing Tees
  • Concentric and Eccentric Reducers
  • Elbows 90D (short and long radius)
  • Elbows 45D (short and long radius)
  • Bends in any radius
TypeSpecificationGrades
Carbon steelASTM A234WPB and WPHY42 to 80
Low TemperatureASTM A420WP3 and WP6
Stainless Steel & Special Stainless SteelASTM A403
ASTM A815
WP 304/304L, WP316/316L, WP310, 317, 321, 347, 410, 904, H
UNS S31803 – Duplex 2205 UNS S32750 / S32760 – Super Duplex 2507A928
Alloy SteelASTM A234WP5 / WP9 / WP11 / WP22 / WP91

Forged Pipe Fittings

We are the dealer of CHEMTRON GmbH, Germany manufacturers of turbine compressor cleaning system. It’s approved by TEEDEE supply forged fittings with socket weld or threaded ends, in all grades of Carbon Steel, Stainless Steel, and Alloy steel, according to EN, ASTM and API standards.Siemens, GE and European gas turbines.


Some of the most supplied Forged Pipe Fittings are:

  • 90D elbow
  • 45D elbow
  • Equal tee
  • Reducing tee
  • Caps
  • Three-piece union
  • Crosses
  • Branches fittings
TypeSpecificationGrades
Carbon steelASTM A105BS EN 545, ISO 2531, ISO 8329, ISO 9523
Low TemperatureASTM A350LF2 and LF3
Stainless Steel & Special Stainless SteelASTM A182F304/304L, 316/316L, 310, 317, 321, 347, 410, 904, H
Alloy SteelASTM A182F5 / 9 / 11 / 22 / 91

Flanges

TEEDEE has a wide range of flanges and spectacle blinds in various materials and sizes in accordance with international standards to complement its range of pipes and fittings for various energy projects.

 

Some of the most common flanges we supply are:

  • Welding neck flange
  • Threaded flange
  • Slip-on flange
  • Socket weld flange
  • Blind flange
  • Lapped flange
TypeSpecificationGrades
Carbon steelASTM A105BS EN 545, ISO 2531, ISO 8329, ISO 9523
Low TemperatureASTM A350LF2 and LF3
Stainless Steel & Special Stainless SteelASTM A182F304/304L, 316/316L, 310, 317, 321, 347, 410, 904, H
Alloy SteelASTM A182F5 / 9 / 11 / 22 / 91

Instrumentation Fittings, Tubes, DBB, Manifold, Ball & Needle Valves

We are the Authorized stockist of PANAM ENGINEERS LTD, INDIA. We keep wide range of Fittings, Tubes, DBB, Manifold, Ball & Needle Valves Some of the most common items we supply are:
Tube & pipe Fitting
  • PANAM Tube & Pipe Fittings are available in Single & Double Ferrule Design.
  • Tube Fittings are available in SS 316, Duplex, Monel, Hastelloy & Brass Materials.
  • Variety of end connections, Male & Female NPT, SW, BSPP, BSPT & 37° Flare.
  • Maximum working pressure up to 10,000 psig. (689 bar).
  • Size ranging from 1/16″ to 2″ OD and 3mm to 50mm OD.
  • Low Torque.
  • Type Test to ASTM F 1387.
  • Leak tight connections, with standing high pressure.
  • NACE certification available upon request.
  • Heat code traceability.
Ball Valves
Features
  • PANAM 400 Series Ball Valves are available in 3 piece design.
  • 300 Series Ball Valves are available in 2 and 3 T port & L port configurations
  • Ball Valves are available in SS 316, Duplex, Monel & Hastelloy Materials.
  • Variety of end connections – Male & Female NPT, BSPP, BSPT.
  • Maximum working pressure up to 10,000 psig. (689 bar).
  • Low Torque.
  • Floating ball design ensures leak proof shut-off at high pressure.
  • Size ranging from 1/8″ to 1″.
  • Delrin, PTFE, PEEK & KEL-F seat available.
  • Anti blow out internally loaded stem for safety.
  • Panel mount and lacking handle option available.
  • NACE certification available upon request.
  • Heat code traceability.
Modular – Double Block & Bleed Valves
Features
  • Designed to Industry standard – ASME B16.34, ASME B31.3, ASME B16.5, API 6D / ISO 14313
  • Double Block & Bleed Valves available in modular mono-block and 3-piece design
  • Available in SS 316, Duplex, Monel & Hastelloy Materials.
  • • Inlet/Outlet Flanged connections – Flanged as per 1/2” to 4”, 150 to 2500 class, API Flanges up to 2.1/16”, 3000, 5000 & 10000 lbs, Thread connections – 1/4″, 3/8”, 1/2”, 3/4″, 1” NPT, BPST, BSPP.
  • Various config – BNB, BBB, BN, NNN, NN.
  • Anti-temper on bleed connection.
  • Maximum working pressure up to 10,000 psig. (689 bar).
  • Seat material – PTFE, PEEK, PCTFE.
  • Optional packing material – PTFE, Graphoil, PEEK & PCTFE.
  • Fire safe to BS 6755 Pt2 / API 607.
  • Fugitive Emission to standards – BS EN ISO 15848-1:2015 + A1:2017; BS EN ISO 15848-2:2015, ASME BPVC SECTION V EDITION 2019, ARTICLE 10 MANDATORY APPENDIX IV
  • NACE certification available upon request.
  • Heat code traceability.
Monoflange – Double Block & Bleed Valves
Features
  • Designed to Industry standard – ASME B16.34, ASME B31.3, ASME B16.5, API 6D / ISO 14313
  • Double Block & Bleed Valves Monoflange are available in SS 316, Duplex, Monel & Hastelloy Materials.
  • Inlet Flanged connections – Flanged as per 1/2” to 4”, 150 to 2500 class, API Flanges up to 2.1/16”, 3000, 5000 & 10000 lbs.
  • Outlet Thread connections – 1/4″, 3/8”, 1/2”, 3/4″, 1” NPT, BPST, BSPP.
  • Anti-temper on bleed connection.
  • Maximum working pressure up to 10,000 psig. (689 bar).
  • Optional packing material – PTFE, Graphoil, PEEK & PCTFE.
  • Fire safe to BS 6755 Pt2 / API 607.
  • NACE certification available upon request.
  • Heat code traceability.
2,3,5 Valve Manifolds
Features
  • PANAM 2,3,5 Valve Manifolds are available in SS 316, Duplex, Monel & Hastelloy Materials.
  • Available in various configuration such as pipe to pipe, pipe to flange and flange to flange.
  • Maximum working pressure up to 10,000 psig. (689 bar).
  • PTFE standard gland packing, Alternate Graphoil packing for high temperature. Max. temperature upto 538°C (1000°F).
  • Non-Rotating Vee-tip / Ball tip provides repetitive & leak tight shut-off.
  • NACE certification available upon request.
  • Heat code traceability.
Instrumentation Tubes

We have Hydraulic tubes and instrumentation tubes in a comprehensive range of corrosion-resistant stainless steels and nickel alloys. All sizes are supplied with smooth surfaces and close dimensional tolerances reducing the risk of leakages when connecting tubes with couplings.

Tube O.D: 1/16″, 1/8″, 3/16”, 1/4″, 5/16″, 3/8″, 1/2″, 5/8″, 3/4″, 1″, 1-1/4″, 1-1/2”, 2”

Tube Wall Thickness: 0.014″, 0.028″, 0.035″, 0.049″, 0.065″, 0.083″, 0.095″, 0.109″, 0.120″,

Tube Type: Straight

Tee Dee International

Welcome to Tee Dee International. We are a leading trader in Steel, Aluminum, Other Ferrous & Non-ferrous metals and oil field equipment in the UAE.

m